Machine Show

Cutting Show

Customer Voice

Autofocus Laser Cutting Head

Without Manual Focusing

The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.

Bigger Adjustment Range

Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.

Long Service Life

Collimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.


Clamp Design

The front and rear chuck clamping design, automatically adjust the center, suitable for various pipes, the diagonal adjustment range is 20~300mm.

It can process super large diameter pipes, and the chuck rotates at a high speed, which can improve the processing efficiency.


Laser cutting machine remote control handle

The operation is simple, and the machine can be remotely controlled for cutting, perforating, moving, calibration, emergency stop and other operations.

Wireless handle control, free control of clamping pressure, convenient and practical, reducing pipe deformation.

Fractional Automatic Support Installation

It employs intelligent tube support design, which can solve the deformationproblems in the process of long tube cutting.

Machine Advantage

G.WK stroke automatic protection

It can monitor the operating range of beams and cutting parts throughout the process. Double guarantee with fixed limit , It can greatly improve equipment and personal safety, and reduce customer risk.


Intelligent Alarm System

It can detect anomalies in advance, reduce hidden dangers, and double the effect of abnormal detection of equipment.


Industry Applications

Take the oil industry for example, the main route of oil transport is the pipeline, and because of the characteristics of the oil itself, leading to the high quality requirements of the pipeline. While fiber laser cutting machine can achieve the pipes multi-angle precision processing to fulfil the oil transportation requirement. Professional tube fiber laser cutting machine—LF60M is used for cutting square tube, rectangular tube, oval tube, waist type tube, hexagonal tube; square tube □ 20 * 20- □150 *150mm, round tube Φ20-Φ 210mm wall thickness of 0.5-10mm carbon steel tube, 0.5-10mm stainless steel tube.

Parâmetros técnicos

Modelo LF-90M
Potência de laser 500W 750W 1000W 2000W 3000W 4000W 6000W 8000W (optional)
Dimensões 15683*1765*2418mm
Área de trabalho Hold diameter Φ20mm~Φ300mm
Repetida precisão de posicionamento ±0.02mm
Velocidade máxima 1.5G
Aceleração máxima ±0.02mm/m
Voltagem e frequência 380V 50Hz/60Hz





Recomendações de produtos relevantes

Liderando o mundo, fabricação da Gweike

LF3015GA Máquina de corte a laser de total fechada

LF4020GH 15000W Máquina de corte a laser de total fechada

LF3015P Máquina de corte a laser da fibra

GR Série Máquina de corte a laser de total fachada

G Série Máquina de corte a laser de total fechada

Privacy Statement

© Copyright 2024 GWEIKE

leave messages