LG6040N CO2 Laser Engraving Machine

Double Work Platform

Can install double work platform, both blade work table and honeycomb work table, can use to do both cutting and engraving.

Auto Focus

Without manually adjust focal length; Improve the efficiency and precision of laser cutting machine.

Hiwin Precise Linear Guide

Equipped with Taiwan Hiwin rail guide, with features of high positioning accuracy, strong load bearing and good dynamic performance.


High Efficiency Particle Air Filter

Environmental protection without pollution.
Three-stage filtration.
The first is bag filtration of large particles.
The second IS HEPA filtration of particles larger than that of 0.03um.
The third is activated carbon adsorbs of smoke and dust odour.

Yongli Laser Tube

Using Yongli laser tube, its photoelectric conversion efficiency is high, the laser output power density is high, the beam is concentrated, and the spot is uniform. The engraving/cutting speed is fast and the engraving line is deep and narrow with high resolution and clear characters. The work life of laser tube is long and the fault rate is low.

Automatic Up And Down Platform

This machine is designed specially for thick material with its automatic up and down platform, customers can engrave on different thickness of materials.


One-click Start Fan

One-click start fan, the operation of the fan is automatically controlled to exhaust smoke produced by cutting.

Leadshine Stepper Motor

Adopt Japanese high performance, low cost stepping motor, it’s new design, new process and with imported core materials. Compared with the common stepping motor, it has the advantages of greater torque, lower heating, better running stability and so on.

U.S II-VI  Optical Lenses

Use high strength gold-plated lenses and aspherical focusing
lenses from U.S II-VI with features of high focus, high

Application Industry

Wood, organic glass, plastic, garments, paper, leather, rubber, and other nonmetal materials.

Technische Parameter

Laser - Typ Sealed CO2 laser tube
Laserleistung 40W 60W 80W (optional)
Schneidebereich 600mm x 400mm
Gesamtmaschinengröße 1360*850*950mm
Schnittgeschwindigkeit 0-36,000mm/min
Zurücksetzen der Positioniergenauigkeit ±0.05mm
Betriebsspannung AC 110-220V±10%,50-60Hz
Bruttopower <1000W
Betriebstemperatur 0-45℃
Betriebsfeuchtigkeit 5-95%





Produkt Empfohlen

Die Welt führen

LC1390N CO2 Laser-Schneide-Maschine

STORM600 CO2 Laser-Schneide-Maschine

LC6040n Laser-Schneide-Maschine

LC1390 Laser-Schneide-Maschine

LC6090 Laser-Schneide-Maschine

Privacy Statement

© Copyright 2021 GWEIKE

leave messages